Skip to contentSkip to conversation

glibc-y2038-tests:add tests-special in run-built-tests yes

PATCH In review rajmohan r 2 participants 5 messages Mar 28, 2025 – Apr 10, 2025

lore
Share & tools
lore

rajmohan r

author
#0 lore raw

PATCH 1/1 glibc-y2038-tests:add tests-special in run-built-tests yes

If 'run-built-tests' is 'yes' run the test binaries, else do not run the test binaries.

Currently its taking 13min to complete do_check() for glibc-y2038-tests. Test binaries are run in do_check() stage though 'run-built-tests' is set 'no'. Which is wrong hence include 'tests-special' target inside the 'run-built-tests' condition when set to 'yes' to avoid running the test binaries.

Also remove 'tests-special' target from the 'tests' and 'xtests' list when run-built-tests set to 'no' to avoid running test binaries.

After this change, no binary is run and time to complete do_check() stage is 3min.

Upstream-Status: Inappropriate [oe-specific]

---
 .../glibc/glibc-y2038-tests_2.39.bb           |   1 +
 ...tests-special-in-run-built-tests-yes.patch | 184 ++++++++++++++++++
 2 files changed, 185 insertions(+)
 create mode 100644 meta/recipes-core/glibc/glibc/include-tests-special-in-run-built-tests-yes.patch
meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +1 -0
index be49ca4cb7..90c112c12f 100644
@@ -5,6 +5,7 @@ inherit ptest features_check
 REQUIRED_DISTRO_FEATURES = "ptest"
 
 SRC_URI += "\
+	file://include-tests-special-in-run-built-tests-yes.patch \
 	file://run-ptest \
 "
 
meta/recipes-core/glibc/glibc/include-tests-special-in-run-built-tests-yes.patch new file +184 -0

184 lines not on this page · raw message

Signature · 1 line
2.34.1
#1 lore raw

Thanks for the patch. It does need to be rebased to master, and submitted for that branch first, then backported to scarthgap.

Also, Khem can you take a look please?

Alex

Quoted 239 lines · rajmohan r via lists.openembedded.org

If 'run-built-tests' is 'yes' run the test binaries, else do not run the test binaries.

Currently its taking 13min to complete do_check() for glibc-y2038-tests. Test binaries are run in do_check() stage though 'run-built-tests' is set 'no'. Which is wrong hence include 'tests-special' target inside the 'run-built-tests' condition when set to 'yes' to avoid running the test binaries.

Also remove 'tests-special' target from the 'tests' and 'xtests' list when run-built-tests set to 'no' to avoid running test binaries.

After this change, no binary is run and time to complete do_check() stage is 3min.

Upstream-Status: Inappropriate [oe-specific]

---
 .../glibc/glibc-y2038-tests_2.39.bb           |   1 +
 ...tests-special-in-run-built-tests-yes.patch | 184 ++++++++++++++++++
 2 files changed, 185 insertions(+)
 create mode 100644 meta/recipes-core/glibc/glibc/include-tests-special-in-run-built-tests-yes.patch
meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +1 -0
index be49ca4cb7..90c112c12f 100644
@@ -5,6 +5,7 @@ inherit ptest features_check
 REQUIRED_DISTRO_FEATURES = "ptest"
 
 SRC_URI += "\
+       file://include-tests-special-in-run-built-tests-yes.patch \
        file://run-ptest \
 "
 
meta/recipes-core/glibc/glibc/include-tests-special-in-run-built-tests-yes.patch new file +184 -1
new file mode 100644
index 0000000000..25777be2eb
@@ -0,0 +1,184 @@
+glibc-y2038-tests: include tests-special in run-built-tests yes
+
+If 'run-built-tests' is 'yes' run the test binaries, else do not run
+the test binaries.
+
+Currently its taking 13min to complete do_check() for glibc-y2038-tests.
+Test binaries are run in do_check() stage though 'run-built-tests' is
+set 'no'. Which is wrong hence include 'tests-special' target inside
+the 'run-built-tests' condition when set to 'yes' to avoid running the
+test binaries.
+
+Also remove 'tests-special' target from the 'tests' and 'xtests' list
+when run-built-tests set to 'no' to avoid running test binaries.
+
+After this change, no binary is run and time to complete do_check()
+stage is 3min.
+
+Upstream-Status: Inappropriate [oe-specific]
+
+Signed-off-by: rajmohan r <[email protected]>
+---
+ Makefile  | 16 ++++++++++++++++
+ Makerules |  2 ++
+ Rules     |  8 ++++++--
+ 3 files changed, 24 insertions(+), 2 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index c8b7e3f..2812e97 100644
+--- a/Makefile
++++ b/Makefile
+@@ -545,21 +545,26 @@ tests-clean: do-tests-clean
+       @$(MAKE) subdir_testclean no_deps=t
+
+ ifneq (,$(CXX))
++ifeq ($(run-built-tests),yes)
+ vpath c++-types.data $(+sysdep_dirs)
+
+ tests-special += $(objpfx)c++-types-check.out
+ $(objpfx)c++-types-check.out: c++-types.data scripts/check-c++-types.sh
+       scripts/check-c++-types.sh $< $(CXX) $(filter-out -std=gnu11 $(+gccwarn-c),$(CFLAGS)) $(CPPFLAGS) > $@; \
+       $(evaluate-test)
++endif # $(run-built-tests) = yes
+ endif
+
++ifeq ($(run-built-tests),yes)
+ tests-special += $(objpfx)check-local-headers.out
+ $(objpfx)check-local-headers.out: scripts/check-local-headers.sh
+       AWK='$(AWK)' scripts/check-local-headers.sh \
+         "$(includedir)" "$(objpfx)" < /dev/null > $@; \
+       $(evaluate-test)
++endif # $(run-built-tests) = yes
+
+ ifneq "$(headers)" ""
++ifeq ($(run-built-tests),yes)
+ # Special test of all the installed headers in this directory.
+ tests-special += $(objpfx)check-installed-headers-c.out
+ libof-check-installed-headers-c := testsuite
+@@ -569,8 +574,10 @@ $(objpfx)check-installed-headers-c.out: \
+         "$(CC) $(filter-out -std=%,$(CFLAGS)) -D_ISOMAC $(+includes)" \
+         $(headers) > $@; \
+       $(evaluate-test)
++endif # $(run-built-tests) = yes
+
+ ifneq "$(CXX)" ""
++ifeq ($(run-built-tests),yes)
+ tests-special += $(objpfx)check-installed-headers-cxx.out
+ libof-check-installed-headers-cxx := testsuite
+ $(objpfx)check-installed-headers-cxx.out: \
+@@ -579,14 +586,18 @@ $(objpfx)check-installed-headers-cxx.out: \
+         "$(CXX) $(filter-out -std=%,$(CXXFLAGS)) -D_ISOMAC $(+includes)" \
+         $(headers) > $@; \
+       $(evaluate-test)
++endif # $(run-built-tests) = yes
+ endif # $(CXX)
+
++ifeq ($(run-built-tests),yes)
+ tests-special += $(objpfx)check-wrapper-headers.out
+ $(objpfx)check-wrapper-headers.out: scripts/check-wrapper-headers.py $(headers)
+       $(PYTHON) $< --root=. --subdir=. $(headers) \
+         --generated $(common-generated) > $@; $(evaluate-test)
++endif # $(run-built-tests) = yes
+ endif # $(headers)
+
++ifeq ($(run-built-tests),yes)
+ # Lint all Makefiles; including this one.  Pass `pwd` as the source
+ # directory since the top-level Makefile is in the root of the source
+ # tree and these tests are run from there.  We add light-weight linting
+@@ -596,7 +607,9 @@ tests-special += $(objpfx)lint-makefiles.out
+ $(objpfx)lint-makefiles.out: scripts/lint-makefiles.sh
+       $(SHELL) $< "$(PYTHON)" `pwd` > $@ ; \
+       $(evaluate-test)
++endif # $(run-built-tests) = yes
+
++ifeq ($(run-built-tests),yes)
+ # Link libc.a as a whole to verify that it does not contain multiple
+ # definitions of any symbols.
+ tests-special += $(objpfx)link-static-libc.out
+@@ -604,6 +617,7 @@ $(objpfx)link-static-libc.out:
+       $(LINK.o) $(whole-archive) -nostdlib -nostartfiles -r \
+         $(objpfx)libc.a -o /dev/null > $@ 2>&1; \
+       $(evaluate-test)
++endif # $(run-built-tests) = yes
+
+ # Print test summary for tests in $1 .sum file;
+ # $2 is optional test identifier.
+@@ -684,6 +698,7 @@ endif
+       rm -f $(symbolic-link-list)
+       touch $(objpfx)testroot.pristine/install.stamp
+
++ifeq ($(run-built-tests),yes)
+ tests-special-notdir = $(patsubst $(objpfx)%, %, $(tests-special))
+ tests: $(tests-special)
+       $(..)scripts/merge-test-results.sh -s $(objpfx) "" \
+@@ -698,6 +713,7 @@ xtests:
+         $(sort $(subdirs)) \
+         > $(objpfx)xtests.sum
+       $(call summarize-tests,xtests.sum, for extra tests)
++endif # $(run-built-tests) = yes
+
+ # The realclean target is just like distclean for the parent, but we want
+ # the subdirs to know the difference in case they care.
+diff --git a/Makerules b/Makerules
+index 00365bc..843f1c0 100644
+--- a/Makerules
++++ b/Makerules
+@@ -1225,6 +1225,7 @@ include $(patsubst %,$(..)libof-iterator.mk,$(cpp-srcs-left))
+ endif
+
+ ifeq ($(build-shared),yes)
++ifeq ($(run-built-tests),yes)
+ # Generate normalized lists of symbols, versions, and data sizes.
+ # This is handy for checking against existing library binaries.
+
+@@ -1314,6 +1315,7 @@ tests-special += $(check-abi-list)
+ endif
+ endif
+
++endif # $(run-built-tests) = yes
+ endif
+
+ FORCE:
+diff --git a/Rules b/Rules
+index 9010c5d..6825f63 100644
+--- a/Rules
++++ b/Rules
+@@ -93,6 +93,7 @@ $(objpfx)check-installed-headers-c.out: \
+ ifneq "$(CXX)" ""
+ # If a C++ compiler is available, also test that they can be compiled
+ # in isolation as C++.
++ifeq ($(run-built-tests),yes)
+ tests-special += $(objpfx)check-installed-headers-cxx.out
+ libof-check-installed-headers-cxx := testsuite
+ $(objpfx)check-installed-headers-cxx.out: \
+@@ -101,8 +102,10 @@ $(objpfx)check-installed-headers-cxx.out: \
+         "$(CXX) $(filter-out -std=%,$(CXXFLAGS)) -D_ISOMAC $(+includes)" \
+         $(headers) > $@; \
+       $(evaluate-test)
++endif # $(run-built-tests) = yes
+ endif # $(CXX)
+
++ifeq ($(run-built-tests),yes)
+ # Test that a wrapper header exists in include/ for each non-sysdeps header.
+ # This script does not need $(py-env).
+ tests-special += $(objpfx)check-wrapper-headers.out
+@@ -120,6 +123,7 @@ $(objpfx)check-obsolete-constructs.out: \
+     $(..)scripts/check-obsolete-constructs.py $(headers)
+       $(PYTHON) $^ > $@ 2>&1; \
+       $(evaluate-test)
++endif # $(run-built-tests) = yes
+
+ endif # $(headers)
+
+@@ -146,9 +150,9 @@ ifeq ($(run-built-tests),no)
+ tests: $(addprefix $(objpfx),$(filter-out $(tests-unsupported), \
+                                           $(tests) $(tests-internal) \
+                                         $(tests-container)) \
+-                           $(test-srcs)) $(tests-special) \
++                           $(test-srcs)) \
+                            $(tests-printers-programs)
+-xtests: tests $(xtests-special)
++xtests: tests
+ else
+ tests: $(tests:%=$(objpfx)%.out) $(tests-internal:%=$(objpfx)%.out) \
+        $(tests-container:%=$(objpfx)%.out) \
--

2.34.1

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#213834): https://lists.openembedded.org/g/openembedded-core/message/213834
Mute This Topic: https://lists.openembedded.org/mt/111953097/1686489
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

author
#2 lore raw
Quoted 3 lines · Alexander Kanavin

Thanks for the patch. It does need to be rebased to master, and submitted for that branch first, then backported to scarthgap.

I have done the patch for master branch also. Checking the time difference with and without patch. I will upload the patch for master branch.

Since the change is in 'Make[file/rules]' and 'Rules' file, so upstreamed for scarthgap branch.
Once the scarthgap patch is reviewed and no comment or any comment is present, this scarthgap patch will help to avoid extra-work for master branch. Hence upstreamed to scarthgap branch.

Quoted 2 lines

Also, Khem can you take a look please?

Thanks for reviewing.

Quoted 250 lines

Alex

Quoted 241 lines · rajmohan r via lists.openembedded.org

If 'run-built-tests' is 'yes' run the test binaries, else do not run the test binaries.

Currently its taking 13min to complete do_check() for glibc-y2038-tests. Test binaries are run in do_check() stage though 'run-built-tests' is set 'no'. Which is wrong hence include 'tests-special' target inside the 'run-built-tests' condition when set to 'yes' to avoid running the test binaries.

Also remove 'tests-special' target from the 'tests' and 'xtests' list when run-built-tests set to 'no' to avoid running test binaries.

After this change, no binary is run and time to complete do_check() stage is 3min.

Upstream-Status: Inappropriate [oe-specific]

---
.../glibc/glibc-y2038-tests_2.39.bb | 1 + ...tests-special-in-run-built-tests-yes.patch | 184 ++++++++++++++++++

2 files changed, 185 insertions(+)

create mode 100644 meta/recipes-core/glibc/glibc/include-tests-special-in-run-built-tests-yes.patch

meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +0 -0
index be49ca4cb7..90c112c12f 100644
@@ -5,6 +5,7 @@ inherit ptest features_check

REQUIRED_DISTRO_FEATURES = "ptest"

SRC_URI += "\
+ file://include-tests-special-in-run-built-tests-yes.patch \
file://run-ptest \
"

diff --git a/meta/recipes-core/glibc/glibc/include-tests-special-in-run-built-tests-yes.patch b/meta/recipes-core/glibc/glibc/include-tests-special-in-run-built-tests-yes.patch

new file mode 100644
index 0000000000..25777be2eb
--- /dev/null
+++
b/meta/recipes-core/glibc/glibc/include-tests-special-in-run-built-tests-yes.patch

meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +40 -0
@@ -0,0 +1,184 @@
+glibc-y2038-tests: include tests-special in run-built-tests yes
+
+If 'run-built-tests' is 'yes' run the test binaries, else do not run
+the test binaries.
+
+Currently its taking 13min to complete do_check() for glibc-y2038-tests.
+Test binaries are run in do_check() stage though 'run-built-tests' is
+set 'no'. Which is wrong hence include 'tests-special' target inside
+the 'run-built-tests' condition when set to 'yes' to avoid running the
+test binaries.
+
+Also remove 'tests-special' target from the 'tests' and 'xtests' list
+when run-built-tests set to 'no' to avoid running test binaries.
+
+After this change, no binary is run and time to complete do_check()
+stage is 3min.
+
+Upstream-Status: Inappropriate [oe-specific]
+
+Signed-off-by: rajmohan r <[email protected]>
+---
+ Makefile | 16 ++++++++++++++++
+ Makerules | 2 ++
+ Rules | 8 ++++++--
+ 3 files changed, 24 insertions(+), 2 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index c8b7e3f..2812e97 100644
+--- a/Makefile
++++ b/Makefile
+@@ -545,21 +545,26 @@ tests-clean: do-tests-clean
+ @$(MAKE) subdir_testclean no_deps=t
+
+ ifneq (,$(CXX))
++ifeq ($(run-built-tests),yes)
+ vpath c++-types.data $(+sysdep_dirs)
+
+ tests-special += $(objpfx)c++-types-check.out
+ $(objpfx)c++-types-check.out: c++-types.data scripts/check-c++-types.sh
+ scripts/check-c++-types.sh $< $(CXX) $(filter-out -std=gnu11

$(+gccwarn-c),$(CFLAGS)) $(CPPFLAGS) > $@; \
+ $(evaluate-test)
++endif # $(run-built-tests) = yes
+ endif

meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +35 -0
+
++ifeq ($(run-built-tests),yes)
+ tests-special += $(objpfx)check-local-headers.out
+ $(objpfx)check-local-headers.out: scripts/check-local-headers.sh
+ AWK='$(AWK)' scripts/check-local-headers.sh \
+ "$(includedir)" "$(objpfx)" < /dev/null > $@; \
+ $(evaluate-test)
++endif # $(run-built-tests) = yes
+
+ ifneq "$(headers)" ""
++ifeq ($(run-built-tests),yes)
+ # Special test of all the installed headers in this directory.
+ tests-special += $(objpfx)check-installed-headers-c.out
+ libof-check-installed-headers-c := testsuite
+@@ -569,8 +574,10 @@ $(objpfx)check-installed-headers-c.out: \
+ "$(CC) $(filter-out -std=%,$(CFLAGS)) -D_ISOMAC $(+includes)" \
+ $(headers) > $@; \
+ $(evaluate-test)
++endif # $(run-built-tests) = yes
+
+ ifneq "$(CXX)" ""
++ifeq ($(run-built-tests),yes)
+ tests-special += $(objpfx)check-installed-headers-cxx.out
+ libof-check-installed-headers-cxx := testsuite
+ $(objpfx)check-installed-headers-cxx.out: \
+@@ -579,14 +586,18 @@ $(objpfx)check-installed-headers-cxx.out: \
+ "$(CXX) $(filter-out -std=%,$(CXXFLAGS)) -D_ISOMAC $(+includes)" \
+ $(headers) > $@; \
+ $(evaluate-test)
++endif # $(run-built-tests) = yes
+ endif # $(CXX)
+
++ifeq ($(run-built-tests),yes)
+ tests-special += $(objpfx)check-wrapper-headers.out
+ $(objpfx)check-wrapper-headers.out: scripts/check-wrapper-headers.py

$(headers)
+ $(PYTHON) $< --root=. --subdir=. $(headers) \
+ --generated $(common-generated) > $@; $(evaluate-test) ++endif # $(run-built-tests) = yes
+ endif # $(headers)

meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +38 -0
+
++ifeq ($(run-built-tests),yes)
+ # Lint all Makefiles; including this one. Pass `pwd` as the source
+ # directory since the top-level Makefile is in the root of the source
+ # tree and these tests are run from there. We add light-weight linting
+@@ -596,7 +607,9 @@ tests-special += $(objpfx)lint-makefiles.out
+ $(objpfx)lint-makefiles.out: scripts/lint-makefiles.sh
+ $(SHELL) $< "$(PYTHON)" `pwd` > $@ ; \
+ $(evaluate-test)
++endif # $(run-built-tests) = yes
+
++ifeq ($(run-built-tests),yes)
+ # Link libc.a as a whole to verify that it does not contain multiple
+ # definitions of any symbols.
+ tests-special += $(objpfx)link-static-libc.out
+@@ -604,6 +617,7 @@ $(objpfx)link-static-libc.out:
+ $(LINK.o) $(whole-archive) -nostdlib -nostartfiles -r \
+ $(objpfx)libc.a -o /dev/null > $@ 2>&1; \
+ $(evaluate-test)
++endif # $(run-built-tests) = yes
+
+ # Print test summary for tests in $1 .sum file;
+ # $2 is optional test identifier.
+@@ -684,6 +698,7 @@ endif
+ rm -f $(symbolic-link-list)
+ touch $(objpfx)testroot.pristine/install.stamp
+
++ifeq ($(run-built-tests),yes)
+ tests-special-notdir = $(patsubst $(objpfx)%, %, $(tests-special))
+ tests: $(tests-special)
+ $(..)scripts/merge-test-results.sh -s $(objpfx) "" \
+@@ -698,6 +713,7 @@ xtests:
+ $(sort $(subdirs)) \
+ > $(objpfx)xtests.sum
+ $(call summarize-tests,xtests.sum, for extra tests)
++endif # $(run-built-tests) = yes
+
+ # The realclean target is just like distclean for the parent, but we

want
+ # the subdirs to know the difference in case they care.

meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +5 -0
+diff --git a/Makerules b/Makerules
+index 00365bc..843f1c0 100644
+--- a/Makerules
++++ b/Makerules
+@@ -1225,6 +1225,7 @@ include $(patsubst

%,$(..)libof-iterator.mk,$(cpp-srcs-left))
+ endif

meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +35 -0
+
+ ifeq ($(build-shared),yes)
++ifeq ($(run-built-tests),yes)
+ # Generate normalized lists of symbols, versions, and data sizes.
+ # This is handy for checking against existing library binaries.
+
+@@ -1314,6 +1315,7 @@ tests-special += $(check-abi-list)
+ endif
+ endif
+
++endif # $(run-built-tests) = yes
+ endif
+
+ FORCE:
+diff --git a/Rules b/Rules
+index 9010c5d..6825f63 100644
+--- a/Rules
++++ b/Rules
+@@ -93,6 +93,7 @@ $(objpfx)check-installed-headers-c.out: \
+ ifneq "$(CXX)" ""
+ # If a C++ compiler is available, also test that they can be compiled
+ # in isolation as C++.
++ifeq ($(run-built-tests),yes)
+ tests-special += $(objpfx)check-installed-headers-cxx.out
+ libof-check-installed-headers-cxx := testsuite
+ $(objpfx)check-installed-headers-cxx.out: \
+@@ -101,8 +102,10 @@ $(objpfx)check-installed-headers-cxx.out: \
+ "$(CXX) $(filter-out -std=%,$(CXXFLAGS)) -D_ISOMAC $(+includes)" \
+ $(headers) > $@; \
+ $(evaluate-test)
++endif # $(run-built-tests) = yes
+ endif # $(CXX)
+
++ifeq ($(run-built-tests),yes)
+ # Test that a wrapper header exists in include/ for each non-sysdeps

header.
+ # This script does not need $(py-env).
+ tests-special += $(objpfx)check-wrapper-headers.out +@@ -120,6 +123,7 @@ $(objpfx)check-obsolete-constructs.out: \
+ $(..)scripts/check-obsolete-constructs.py $(headers)
+ $(PYTHON) $^ > $@ 2>&1; \
+ $(evaluate-test)
++endif # $(run-built-tests) = yes

meta/recipes-core/glibc/glibc-y2038-tests_2.39.bb +15 -1
+
+ endif # $(headers)
+
+@@ -146,9 +150,9 @@ ifeq ($(run-built-tests),no)
+ tests: $(addprefix $(objpfx),$(filter-out $(tests-unsupported), \
+ $(tests) $(tests-internal) \
+ $(tests-container)) \
+- $(test-srcs)) $(tests-special) \
++ $(test-srcs)) \
+ $(tests-printers-programs)
+-xtests: tests $(xtests-special)
++xtests: tests
+ else
+ tests: $(tests:%=$(objpfx)%.out) $(tests-internal:%=$(objpfx)%.out) \
+ $(tests-container:%=$(objpfx)%.out) \
--

2.34.1

#3 lore raw
Quoted 6 lines · rajmohan r via lists.openembedded.org

Since the change is in 'Make[file/rules]' and 'Rules' file, so upstreamed for scarthgap branch.
Once the scarthgap patch is reviewed and no comment or any comment is present, this scarthgap patch will help to avoid extra-work for master branch. Hence upstreamed to scarthgap branch.

That's not how the oe-core patch submission process works. Internally you can write and test patches in any order you like, but when sending them here for review, you must submit for master first.

Alex

author
#4 lore raw
Quoted 11 lines · Alexander Kanavin
Quoted 6 lines · rajmohan r via lists.openembedded.org

Since the change is in 'Make[file/rules]' and 'Rules' file, so upstreamed for scarthgap branch.
Once the scarthgap patch is reviewed and no comment or any comment is present, this scarthgap patch will help to avoid extra-work for master branch. Hence upstreamed to scarthgap branch.

Quoted 3 lines

That's not how the oe-core patch submission process works. Internally you can write and test patches in any order you like, but when sending them here for review, you must submit for master first.

I have send the patch to master branch and the link is https://lists.openembedded.org/g/openembedded-core/topic/patch_glibc_y2038_tests_add/112188476

Quoted 2 lines

Alex